Wunder-audio CM12 Manuel d'utilisateur télécharger pdf

1. CM12

The Wunder Audio CM12 Tube Microphone is targeted to the

professional with the most demanding criteria. The CM12 uses the

larger Hiller T14/1 output transformer that was standard in the early

C12. The beautiful hand made capsule is a CK12 style. These

boutique microphones are hand assembled in Texas per customer’s

order. Tubes are hand tested NOS GE 5-star 6072.

It should be stressed that vacuum tubes, with their heater ﬁlaments,

are much more delicate than solid-state components. Consequently,

the user should take great care in handling the microphone. A drop

from even a moderate height may cause the ﬁlament to break and

may result in immediate failure of the microphone. It would be

advisable for the user to keep a spare tube – specially selected by

the Wunder Audio Service Department – always ready for

replacement.

It is important to note that the tube may have become slightly

unplugged from the tube socket during shipping. If the microphone

has no audio output, 99% of the time it is a result of a slightly

unplugged tube.

How to Replace the Vacuum Tube

Repairs are to be carried out only by experienced, authorized

service personnel. Unauthorized opening of, or modiﬁcation to

the equipment shall void the warranty.

The microphone tube requires a high operational voltage.

Contact with the voltages present in the interior of the

microphone and PSU may result in injury or death; therefore,

the microphone and PSU must be opened only by an

authorized, qualiﬁed technician.

The microphone must be operated only with the supplied

cable. Because hazardous voltages are generated by the PSU

that may result in injury or death, always ensure that the

microphone cable is undamaged. Damaged cables must no

1 2 3 4 5 6

Résumé du contenu

Page 1

1. CM12The Wunder Audio CM12 Tube Microphone is targeted to the professional with the most demanding criteria. The CM12 uses the larger Hiller T14/1 o

Page 2

longer be used.1. Disconnect microphone from PSU.2. Turn the three grub screws at the lower end of the microphoneinto the body in a clockwise directio

Page 3

with standard thread sizes. It may also be swiveled against the stand axis to suit the recording angle.Powering of the MicrophoneThe required PSU is i

Page 4

directly next to the large AC transformer.To set the switch to 115V, toggle the switch towards the transformer. To set the switch to 230V, toggle the

Page 5

stored in a cool, dry place and protected from dust.!CleaningUnder normal conditions the microphone body may become dirty and covered with ﬁngerprints

Page 6

Powering: Via the included powering unit with 115/230 VACMaximum Sound Pressure Level: 138 dBSensitivity: approx 1 mvolts per dyne / cm sqNon Linear D

Commentaires sur ces manuels

Pas de commentaire

Wunder-audio CM12 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Microphones Wunder-audio CM12. Wunder Audio CM12 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Microphones Wunder-audio CM12